We've teamed up with
Dartsfilmz
to bring you a speciality union jack tinted film. These graphics
are supplied oversized so they can be trimmed during fitting.
The film can be fitted to any flat glass window, such as your
Minis quarter lights, rear windscreen or perhaps your sunroof!
The results are brilliant!
Check out the example below to see how to fit the film to the quarter
light of your Mini.
How To Fit
1. Remove the quarter light to ease the fitting process. The
quarter light is easily removed by undoing four screws securing
the internal brackets. Ensure the
window is clean, dry and grease free.
2. With the screws removed the quarter light can be lifted
free of the car.
3. Lay the window on a clean flat surface. Spray the glass
with a mixture of water and washing up liquid.
4. Spray the film with the water solution and lay the it centrally on the
window. Do NOT remove the backing at this stage.
5. Roughly trim around the window using a craft knife.
6. Remove the excess film to make the graphic easier to work
with.
7. Smooth the film onto the glass.
8. Using a craft knife trim the film to the exact size
required.
9. Remove the excess film.
10. Remove the film from the glass and ensure the glass is still
clean.
11. Remove the backing from the film.
12. Spray the sticky side of the film with the water
solution.
13. Smooth the film onto the glass, removing any excess
water. Allow the water to evaporate.
