Angel Eye headlights are available as a
direct replacement for standard Mini 7" headlights. They offer
increased visibility, with a halo effect side light ring.
How To Fit
1. Disconnect the battery before starting. Remove the screw
from the bottom of the outer headlight rim and pull the rim
free.
2. The existing headlight is held in place by an inner ring.
Remove the 3 retaining screws for the inner ring and the
headlight will come free. Disconnect the electrical connections
for the main beam and side light.
3. Remove the existing side light from the wiring circuit.
4. Connect the new angel eye twin side lights in place of
the old single side light.
5. Insert the required coloured covers for the halo (blue,
green or red).
6.
Insert the sidelights into the angel eye and insert whichever
type of main beam bulb you require.
7. Attach the
electrical connections to the main beam bulb. Ensure the supplied rubber cover is fitted to protect the
bulb and connections.
6. Push the new headlight into the headlight bowl and
replace the inner rim to hold the headlight in place. Finally
replace the outer rim.
7. Repeat for the other headlight, reconnect the battery and
your new angel eyes are ready to go.
